









Dielectric ROC Drop Cable Assemblies
-
Product Model
Dielectric ROC Optitap Drop
Product Description
Angnet's ROC drop cable assembly with factory-terminated, environmentally sealed and hardened connectors to reduce the cost and time of drop cable deployment.
The Optitap hardened connectors provide superior durability and reliability in the drop segment of the network. This assembly also offers significant improvements in cable management. By featuring the ROC drop cable design, issues of slack storage capacity are virtually eliminated. The ROC drop cable minimum bend radius is half the size of legacy drop cable. The outer dimensions of the cable have been reduced by more than50%. ROC drop cables are more flexible, allowing for easier routing at the ONT. Installers will see a reduction in truck storage space requirements with this new design. -
- Compatible with Corning-OptiTap and H-Connector;
- Factory terminated for high performance;
- Available with one or both ends connectorized;
- Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip;
- Available in dielectric or toneable;
- Designed for aerial, direct-buried or duct installation;
- IP-68 water and dust protection ;
- -40℃~85℃ operating temperature;
-
Product name Dielectric ROC Drop Cable Assemblies Cable Type dielectric or Toneable Cable diameter 3.0x5.4mm dielectric ROC cable Application Aerial , Direct Buried , Duct Termination Both end or one end Specifications - Connector A Reflectance, Typical -65 dB Insertion Loss, Typical ≤ 0.15 dB Connector Type SC/APC OptiTap connector(H Connector) Specifications - Connector B Reflectance, Typical -65 dB Insertion Loss, Typical ≤ 0.15 dB Connector Type SC APC Connector (simplex) with 2.0mm or 2.9mm leg Optical Characteristics Fiber Type Single-mode Fiber count 1F Fiber Category G.652.D Wavelengths 1310 nm / 1550 nm Maximum Attenuation 0.35 dB/km / 0.25 dB/km -
- FTTH;
- Outdoor Areas;
- Harsh Environment.
Category:
Corning OptiTap
- 产品描述
- Features
- Specification
- Application
- Download
-
- Compatible with Corning-OptiTap and H-Connector;
- Factory terminated for high performance;
- Available with one or both ends connectorized;
- Hybrid (one end with an OptiTap Connector, one end with standard SC connector) available with or without pulling grip;
- Available in dielectric or toneable;
- Designed for aerial, direct-buried or duct installation;
- IP-68 water and dust protection ;
- -40℃~85℃ operating temperature;
-
Product name Dielectric ROC Drop Cable Assemblies Cable Type dielectric or Toneable Cable diameter 3.0x5.4mm dielectric ROC cable Application Aerial , Direct Buried , Duct Termination Both end or one end Specifications - Connector A Reflectance, Typical -65 dB Insertion Loss, Typical ≤ 0.15 dB Connector Type SC/APC OptiTap connector(H Connector) Specifications - Connector B Reflectance, Typical -65 dB Insertion Loss, Typical ≤ 0.15 dB Connector Type SC APC Connector (simplex) with 2.0mm or 2.9mm leg Optical Characteristics Fiber Type Single-mode Fiber count 1F Fiber Category G.652.D Wavelengths 1310 nm / 1550 nm Maximum Attenuation 0.35 dB/km / 0.25 dB/km -
- FTTH;
- Outdoor Areas;
- Harsh Environment.
Related Products
Whether is a product enquiry or technical help, please send messager here, our team will respond within 24-48 hours.
(We need the information marked with an * in order to contact you.)