Cat6A Keystone Jack
Cat6A Keystone Jack
Transmits digital and analog voice, data and video signal in the network.
Respectively applicable for the application of all Level D & Level E.
Respectively conform to Cat6A standards specified in EN50173, ISO 11801 Version 3 or EIA/TIA568B.2-1
Keystone shielding housing: Nickel-plated copper alloy
Marked with T568A/568B routing color codes to avoid unnecessary routing misoperation.
With protective cover to make IDC contact operate normally operate in bad condition.
High compression flame resistant material, grade UL94V-0.
Snap-in simple clamping method, easy use.
Termination: Termination color codes are subject to TIA/EIA 568.
1. The device is suitable for connection and communication between the work area outlet to achieve signal transmission.
2. compact, making products look simple, elegant.
3.IDC end color press note some wire for fast and accurate wire.
The module is equipped with a dust cover for protection, shelter dust and dirt.
5. Repeat the plug and socket mating cycles ≥750 times.
6.IDC: cable can be connected via the 22 ~ 26AWG, card access number can be repeated ≥200 times.
7. Contact resistance: under normal atmospheric conditions the contact resistance ≤2.5MΩ.
8. Insulation resistance: under normal atmospheric conditions Insulation resistance ≥1000MΩ.
9. high pressure: AV 750V1 minutes without breakdown and arcing phenomena.
10. The plastic body material: PC PBT fire rating of UL 94-V0.
11. Terminal Material: Phosphor Bronze.
12.RJ45 interface terminal: gold 3μ '' ~ 50μ ''.
|IDC Contact||50 micron Gold coated,0.5mm Wire Dia. IDC connection ≥200 times|
|Contact Resistance||≤2.5 M ohm|
|Insulation Resistance||≥1000 M ohm|
|Dielectric Strength||DC1000V or AC700V in 1 min.,No Arc & Spark-over.|
|Life Span||Plug/Pull ≥750 times|
network cable cabling
Please contact our sales team!
Whether is a product enquiry or technical help, please send messager here, our team will respond within 24-48 hours.
(We need the information marked with an * in order to contact you.)