Product Model
Product Model
Angnet's Multiport Service Terminal (MST) Box is used for access points of the FTTx-ODN network. It is a product with all inlet and outlet cables pre-connected, eliminating the need of closure opening and fiber splicing. All ports are equipped with hardened adapters. The operators do not need to splice fibers or open boxes during ODN deployment, which improves service provisioning efficiency. MST box is a new economic fiber distributed solution for outdoor use. Compare traditional products, MST box is easy to operate and has high compatibility. Reduces the total cost of operation (TCO) by 15–30%. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation. MST box not only used in FTTH field, but also used in FTTA or other harsh environment.
Angnet's Multiport Service Terminal (MST) Box is used for access points of the FTTx-ODN network. It is a product with all inlet and outlet cables pre-connected, eliminating the need of closure opening and fiber splicing. All ports are equipped with hardened adapters. The operators do not need to splice fibers or open boxes during ODN deployment, which improves service provisioning efficiency. MST box is a new economic fiber distributed solution for outdoor use. Compare traditional products, MST box is easy to operate and has high compatibility. Reduces the total cost of operation (TCO) by 15–30%. It can be used for wall-mounting, aerial installation or holding pole installation, based on different situation. MST box not only used in FTTH field, but also used in FTTA or other harsh environment.
Plug and play adapter ports, fully compatible with Optitap and H-connector;
2, 4, 6, 8, 10, 12, 16 18 ports are available;
Stub pigtail length from 10 ft to 1750 ft available;
SST, ROC or 5.0mm round input stub cables;
Pole, pedestal, handhole, or strand mounting options;
IP-68 waterproof protection.
| Product name | Multiport Service Terminal, 2 port, Single-Tube Gel-Filled Cable, Toneable, Stubbed |
| Cable Type | Toneable (Dielectric available) |
| Cable diameter | 4.5mm*9.7mm toneable |
| Installation | Pole, pedestal, handhole, or strand mounting options |
| Stub length | 50, 100, 200, 250, 500, 750, 1000, 1250, 1500, 1750, and 2000 feet (additional lengths available) |
| Specifications - Hardened adapter | |
| Reflectance, Typical | -65 dB |
| Insertion Loss, Typical | ≤ 0.15 dB |
| Adapter Type | SC/APC Hardened adapter, compatible with Corning Optitap and H-connector |
| Optical Characteristics | |
| Fiber Type | Single-mode |
| Fiber count | 2F |
| Fiber Category | G.652D |
| Wavelengths | 1310 nm / 1550 nm |
| Maximum Attenuation | 0.35 dB/km / 0.25 dB/km |
FTTH;
Outdoor Areas;
Harsh Environment.