The main purpose of the quality optitap fiber connector is to realize the connection of optical fibers. Optical fiber connectors, which have been widely used in optical fiber communication systems, have many types and different structures. But on closer inspection, the basic structure of various types of quality optitap fiber connectors is the same, that is, most fiber optic connectors generally use high-precision components (composed of three parts, two pins and a coupling tube) Aligned connection of optical fibers is achieved.
In this method, the optical fiber is inserted and fixed in the ferrule, and after the surface of the ferrule is polished, alignment is achieved in the coupling tube. The outer components of the pins are made of metal or non-metal materials. The butt end of the ferrule must be ground, and the other end usually uses a bend limiting member to support the fiber or fiber optic cable to relieve stress. The coupling tube is generally made of two-half synthetic and fastened cylindrical members made of ceramic, or bronze, etc., and is mostly equipped with a metal or plastic flange to facilitate the installation and fixation of the quality optitap fiber connector. In order to align the fibers as precisely as possible, the processing precision of the pins and coupling tubes is very high.
The quality optitap fiber connector is a detachable (movable) connection device between the optical fiber and the optical fiber. It precisely butts the two end faces of the optical fiber so that the light energy output by the transmitting fiber can be coupled to the receiving fiber to the maximum extent. And minimize the impact on the system due to its intervention in the optical link, which is the basic requirement of the quality optitap fiber connector. To a certain extent, optical fiber connectors affect the reliability and performance of optical transmission systems.