Fiber Optic Cleaner

AngNet Tech's fiber optic connector cleaner is designed to effectively and quickly clean connector endfaces, both the unmated patch cord and through the adapter. It cleans the ferrule end faces removing dust, oil, and other debris without nicking or scratching the end face. FOPC-302 is very easy to use and suitable for SC/ST/FC connectors.

Fiber Optic Connector Inspection Steps:

Clean: Clean the end face of all components in each mated pair to avoid contamination before connection;
Inspect: Inspect each mated pair with a Fiber Inspection Microscope to verify end face cleanliness. If contamination is present, re-clean and re-inspect each mated pair. (Warning: Invisible laser radiation might be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments.)
Connect: Make each connection immediately after successful visual inspection of the mated pair;
RE-Clean: If you disconnect the connections, please re-clean and re-inspect all components before you connect.

1. LC about 1.25 mm fiber connectors male female head;
2. SC/ST/F-C about 2.5 mm fiber connectors male female head